Hummer Mill FR 12
HAMMER MILL Mod. FR – 12 may be used as a normal Hammer Mill to pulverize cereals, herbs, legumes, and any other not-oily product or as pre-Crusher to obtain a smaller size for those products that have to be further processed.
Product enters the grinding chamber where it’s beaten repeatedly, at high speed by the rocking hammers that crush it.
The product remains inside the grinding chamber and its grinding goes on, as long as it has the right size to pass through the sieve’s holes.
The sieve’s hole size is chosen depending on the requested granulometry of various products.
The grinded product goes down in the discharge hopper and then conveyed into silo or sacks.
the frame and the in-let and out-let hoppers are built in painted carbon steel – on request it’s possible to built the Mill completely in stainless steel – having high thickness and continuous welded.
Equipped with support frame in carbon steel sheet bended and painted. Driven by electric motor from kw.1,1 to kw.4,0, with possibility to choise the speed 3000, 1500, 1000 or 750 rpm. It’s also possible to use double or more speed, monophase, triphase, 240 and 400 volts.
In the inside is complete with 12 hammers in hardened carbon steel – or stainless steel – which rock on seel in carbon steel C 45.
Door which can be completely opened for easy entrance and maintenance of the grinding chamber.
Longer life for the hammers You can use in any four cutting corners.
TECNICAL DATA TABLE
|FR12 / FRX12||4||150÷ 800
(depends on products and grid size)